Resources

What if my splint doesn’t fit?
All regular splints may be exchanged free of charge if they are in “like new” condition. We encourage patients to try out splints to make sure they fit properly. The silver from which the splints are manufactured is malleable and the angle between the rings may be manually changed to adjust the fit of the splint. These changes are expected and will not prevent the splints from being exchanged free of charge. Never use tools when adjusting the splints as tools will scratch the splints. Splints with heavy scratches or tool marks may not be exchanged. Return instructions are supplied with all orders. See How do I return a splint for more information.

Adjustments

MAKING THE SPLINT FIT

LARGER

The splint size can be increased by about a size by decreasing the angle between the rings. Place the splint on a flat surface and using even pressure, bend rings closer together. Make small adjustments and check the fit between each adjustment.

Squeezing the rings together loosens the fit of the splint. This adjustment can allow a finger to reach a neutral position if the splint is holding the finger in slightly bent position.

MAKING THE SPLINT FIT

SMALLER

The splint size can be decreased by about a size by increasing the angle between the rings. Place the splint on a flat surface and using even pressure, bend rings further apart. Make small adjustments and check the fit between each adjustment.

Spreading the rings apart tightens the fit of the splint. This adjustment can hold a finger in a slightly bent position and may help avoid locking or clicking in the joint.

ADJUSTING THE

PVX

MCP & STABLE THUMB SPLINTS
Without tools, bend the PVX closer or farther from palm to provide support under joint and block collapsing. PVX may need to be twisted for more even pressure. If PVX cannot be adjusted by the therapist, return to SilverRing™ Splint to assist with adjustments.

The Spoon PVX gives more directional support and the U PVX avoids that direct pressure.

ADJUSTING THE

BRACELET

MCP & STABLE THUMB SPLINTS
Use a twisty tie or string to temporarily adjust bracelet. After trialing length, a local jeweler can also adjust bracelet which does NOT void warranty. Links cannot be added back after adjustment. Bracelet can also be permanently adjusted at no cost by SilverRing™ Splint.

Bracelet can be worn in multiple ways and should be trialed before final adjustment. If patient wishes to crisscross bracelet a longer length can be requested at no cost

For printable bracelet adjustment instructions for jewelers, click HERE.

Returns

Repairs/Reshapes/Returns

Bent or misshapen splints can be reshaped and price will be based on labor. Broken PVXs can be repaired. Cracked or broken splints should be replaced. Standard splints may be returned while still new. If adjusting does not work, place the splint(s) back in a box for return. Write changes needed directly on the back of the invoice or packing slip. Return authorization is not required but please include phone and email.

If you have lost your invoice with Return form on the back you can download a new Return form (RMA) here.

Care Instructions

SilverRing™ Splints are made of sterling silver, a silver-copper alloy which is 92.5% pure silver and 7.5% copper. Sterling silver contains NO nickel. They can be cleaned as you would with any sterling silver products. Tarnish can occur with reactions to body chemistry, medications, hand lotions, zinc oxide and exposure to chemicals like hot tubs or pools. Foods like eggs, onions and some shellfish can also cause a reaction. 14k Gold can be an option for someone who will be in constant contact with such chemicals on a regular basis.